OEM Rail Frame For Decoration Aluminum Material Mill Finish With RoHS
Product Description
|
Packing : Protect film for each profile, shrink film/Kraft paper exterior for each bundle or pack as customer request.
|
|
FOB port: Foshan, Shenzhen, Guangzhou
|
|
Delivery time: 15-20 days after receiving the deposite.
|
|
Payment term: 30% deposite and 70% balance after the delivery
|
|
Brand name: Kaiyamei Aluminum
|
|
Material: 6063 Alloy
|
|
Temper: T5
|
|
Finish: Mill Finished, Anodize, Electrophoresis, Powder Coating ,Polish, Wood grain, Sand Blasting
|
|
Color: Clear Satin, Bronze, Black, Golden, Silver, Steel Gray......
|
|
Thickness: Customize
|
|
MOQ: 500KG. Usually 12 tons for a 20 feet container; 24 tons for a 40 feet container.
|
|
Length: 5.8-5.98m, or as customer's request
|
|
Sample delivery: Two weeks (one week for mould +one week making sample)
|
|
Sample design: It is better we can get your drawing or sample, we mainly make according to your design, and we can keep confidential for your design.
|
|
Maximum extruder machine: 8000 tons; Minimum extruder machine: 500 ton
|
|
Delivery: About a month, it depends on quantity and size.
|
|
If the profiles are customized, we will make the sample first, after we get the confirmation from you, we will start production.
|
Advantages:
(1) Complex integral shapes
(2) Cost effective
(3) Low tooling costs
(4) Design flexibility
(5) Versatility in joining
(6) Machinable
(7) Rapid prototyping
(8) Short delivery
(9) Wide range of finishes
(10) Plenty of patterns and colors for your choice.
(11) Strict control for surface finish, very little scratch.
(12) Accurate mold as well as accurate size.
(13) Standard alloy composition
(14) Both ends of the profiles are very plain and with no burr.
General Chemical Composition of Alloy
| Alloy |
6063(%) |
6061(%) |
6082(%) |
| Silicon Si |
0.20~0.60 |
0.40~0.80 |
0.7~1.2 |
| Iron Fe |
0.35 |
0.70 |
0.5 |
| Copper Cu |
0.10 |
0.15~0.40 |
0.1 |
| Manganese Mn |
0.10 |
0.15 |
0.4~0.8 |
| Manganese Mg |
0.45~0.90 |
0.18~1.2 |
0.6~0.8 |
| Chromium Cr |
0.10 |
0.04~0.35 |
0.25 |
| Zine Zn |
0.10 |
0.25 |
0.2 |
| Titanium Ti |
0.10 |
0.15 |
0.1 |
| Others(each) |
0.05 |
0.05 |
0.05 |
| Others |
0.15 |
0.15 |
0.15 |
| Aluminum |
Remainder |
Remainder |
Remainder |
Mechanical Properties of Sections under Room Temperature
|
Alloy
|
State
|
Tensile strength test |
Hardness test |
| Tensile strength Rm M pa |
Non-proportional Stretching Stress |
Stretching rate |
Pattern thickness |
HV |
HW |
| Rp0.2Mpa |
(A50mm%) |
mm |
HV |
HW |
| |
| 6063 |
T4 |
130 |
75 |
14 |
- |
| T5 |
160 |
110 |
8 |
0.8 |
58 |
8 |
| T6 |
205 |
180 |
8 |
- |
|
6061
|
T4 |
184 |
110 |
16 |
- |
| T6 |
265 |
245 |
8 |
- |
|
6082
(6351)
|
T4 |
205 |
110 |
12 |
- |
| T6 |
290 |
250 |
6 |
- |
FQA
Q1: What is aluminum extrusion, fabrication, and anodization?
A: Aluminum Extrusion refers to a process of creating shapes with an aluminum billet or log by forcing it to flow through a shaped opening in a die. Aluminum can be extruded into standard shapes or specific designs depending on a customer’s preference.
Aluminum Fabrication refers to building aluminum components by cutting, drilling, slotting, tapping,bending, CNC machining, mechanical assembly and welding.
Aluminum Anodization is an electro-chemical process of coating aluminum with a thin layer of oxide to increase corrosion resistance and harden the surface.
Aluminum also can be dyed with various anodizing colours,which in most widely used is Brone shades.
Q2: What’s the thickness for anodizing? Can you do 15um?
A: Our normal thickness is about 10 um. Yes, we can do 15um and above.
Q3: What color you can do for powder coating? The thickness for powder coat?
A: We can do any color for powder coat as long as you can provide the color sample. Our normally powder coating thickness is 60-80um.
Q4: What color you can do for wood grain?
A: Our most popular colors are Western Red Cedar, Australia Cedar, Jarrah I, Jarrah II, Chestnut, Bush Cherry, Bush Wood, Western Wood, Snow Gum, etc. If you need any other colors, we can do according to the color samples you provide.
Our company :
Foshan Kaiya Aluminum Co., Ltd is a comprehensive and professional enterprise integrating research, design production and sales of aluminium extrusion profiles for construction and industrial applications. There are currently 24 aluminum extrusion process lines at 500MT TO 2500MT, 5 process lines for anodizing, 3 process lines for powder coating, 2 process line for painting, 2process line of polishing and brushing. We still have 2 packing line. Our annual production capacity has reached 80,000 tons which is at the forefront of the aluminium industry in China.
Product Tags:
|
|
Rail Frame Decorative Aluminum Trim RoHS For Decoration Aluminum Material Images
|
